PLT02-122SC

 

General information

The new RF Module PLT02-122SC is a state of the art RF Module designed as final stage for band II FM amplifiers and uses a single LDMOS of the last generation capable of 1200 W RF output. The module is realized with an ultra compact layout to maximize the number of pallets in high power amplifiers and include the bias circuits, matching networks and circuits for stabilization of the operating point. The configuration of the amplifier is a “push-pull” stage coupled by means of the combining network fully integrated in the RF block. This design allows to obtain broadband high efficiency and extremely low harmonic emissions that are all at least 50 dB below the carrier

Technical Specifications (th = 25 °C ; 50 OHm loaded ; Vdc = +48Vdc) 

• Output power:  1200W CW
• Power Gain:  >20 dB (@ full power)
• Input power: 10W (nominal)
• Frequency range:  87 to 110 MHz
• Class operation: B saturated
• Drain current: 30A typical
• Drain efficiency:  83% (@1200W CW)
• Input return loss:  >15 dB
• Insertion phase variation:  ±5° max
• Gain variation:  ±1 dB max
• Harmonic emissions:  <50dBc
• Power supply requirement:  +48Vdc ±2% ; 32A max.
• Heat sink requirement :  <0.1 °C/W
• Operating temperature :  -5°C to +45°C
• Dimensions: 115 x 52 x 25mm
• Weight: 350 gr (with Cu base-plate)